BidTerrierSign in

F16_AN_APG_68_NSN_1270_01_396_3088_PN_783R300G01

Dept of Defense, Dept of the Air Force

403 days leftSources sought
View the official notice at sam.gov

The official notice is always free. Read the full documents there before you bid.

Key facts

Closes
Dec 30, 2027, 12:00 AM ET (403 days left)
Place of work
Tinker AFB, Oklahoma
Notice type
Sources soughtThe agency is checking which businesses could do the work. It is not a request for a bid.
Solicitation number
F16_AN_APG_68_NSN_1270_01_396_3088_PN_783R300G01
Office
FA8122 AFSC PZAAB
Posted
Jan 9, 2026
Contact in the notice
Tracey Beringer, tracey.beringer@us.af.mil
Source
SAM.gov Contract Opportunities

What this is

A plain-English summary has not been written for this notice yet. The facts above come straight from the notice, and the original description is further down this page.

Similar open bids

  • Tab, Trim, Aircraft

    Dept of Defense · Tinker AFB, Oklahoma

    Closes todaySolicitation

    Closes Nov 22, 2026, 3:00 PM ET

    Dept of Defense posted a solicitation titled "Tab, Trim, Aircraft". Place: Tinker AFB, Oklahoma. Responses are due Nov 22, 2026, 3:00 PM ET. The listing has little detail. Read the official notice for the full scope.

  • Upgrade X-Ray Controller

    Dept of Defense · 0, Oklahoma

    Closes tomorrowSolicitation

    Closes Nov 23, 2026, 11:00 AM ET

    Dept of Defense posted a solicitation titled "Upgrade X-Ray Controller". Place: 0, Oklahoma. Responses are due Nov 23, 2026, 11:00 PM ET. The listing has little detail. Read the official notice for the full scope.

  • Design and Construction of a Modernized Facility (Building 129 Lunch and Locker Room Facility) at McAlester Army Ammunition Plant (MCAAP)

    Dept of Defense · McAlester, Oklahoma

    Closes tomorrowSources sought

    Closes Nov 23, 2026, 1:00 PM ET

    The Department of the Army is seeking information about companies that can design and build a modernized lunch and locker room facility (Building 129) at the McAlester Army Ammunition Plant. This notice is a "Sources Sought Notice" to help the government plan a future project.

  • RENEWAL SEALS - TELESCOPE CYLINDER

    Dept of Defense · McAlester, Oklahoma

    Closes tomorrowCombined synopsis and solicitation

    Closes Nov 23, 2026, 1:30 PM ET

  • WWYK250063 - INSTALL REACT VII FACILITY, B9001, POST V19

    Dept of Defense · Tinker AFB, Oklahoma

    Closes tomorrowSolicitationWomen-owned small business set-aside

    Closes Nov 23, 2026, 3:00 PM ET

    The Department of the Air Force is seeking a contractor to install the REACT VII facility at Building 9001, Post V19. This is a solicitation for construction work under NAICS 236220.

Recent awards from Dept of Defense

Award notices this agency published, as listed by the source.

Original description from the notice

REPAIR QUALIFICATION REQUIREMENTS NSN: 1270-01-396-3088 P/N: 783R300G01 Noun: Advanced Programmable Signal Processor Application: AN/APG-68 Radar, F-16 C/D Aircraft 2 Jun 2020 Section C 1/3 SECTION C: 1. QUALIFICATION REQUIREMENTS THAT MUST BE SATISFIED TO BECOME A QUALIFIED SOURCE a. Prequalification Notice: The offeror shall notify the appropriate government Small Business Office or, if responding to a solicitation, the contracting officer in the appropriate government contracting office, of intent to qualify as a source for this Advanced Programmable Signal Processor. b. Facilities, Testing, and Inspection Capabilities: The offeror must certify to the government that they have, or have access to, the required facilities and equipment to repair, inspect, test, package, and store the item. The offeror shall make their facilities, equipment, tooling, and personnel available for evaluation and inspection by the government. c. Data Verification: The offeror must verify that they have a complete data package. This verification must include a complete list of all procedures, drawings, and specifications, including change notices, in the offeror’s possession including, at a minimum Northrop Grumman (97942) drawing 783R300. The offeror may also be required to produce copies of all applicable procedures, drawings, or specifications. Note, not all information can be provided. d. Repair Process Verification: The offeror must repair this item to conform to the government requirements as prescribed within the ESA-approved engineering/technical data package. The offeror must show compliance with Unique Identification (UID) requirements in accordance with DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror must provide, at their own expense, data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the government requirements as prescribed by 416 SCMS/GUEAA. The offeror shall also identify its sources for materials and its standards for internally used processes. e. Test and Evaluation and/or Verification: The offeror, at their own expense, shall prepare and submit to 416 SCMS/GUEAA for their prior approval, a qualification test plan/procedure detailing how they intend to verify compliance with all performance, environmental, mechanical, and quality assurance requirements identified by Drawing 783R300. The government retains the right to exercise the option to inspect the testing processes, including on-site witnessing of any or all documented testing. To allow accomplishing this, the offeror shall notify the government at least 30 days in advance of the occurrence of any testing that will be used as a basis for qualification. The offeror’s facilities shall be made available for government inspection during these tests. REPAIR QUALIFICATION REQUIREMENTS NSN: 1270-01-396-3088 P/N: 783R300G01 Noun: Advanced Programmable Signal Processor Application: AN/APG-68 Radar, F-16 C/D Aircraft 2 Jun 2020 Section C 2/3 f. Qualification Article Verification: This requirement is waived for this article, because a qualification article cannot be provided. g. Qualification Requirement Cost Estimate: Estimated likely costs for testing and evaluation, which will be incurred by the potential offering party to become qualified are $76,000.00. h. Qualification Time Completion Estimate: It is the estimate of the engineering support activity that completion of this qualification effort should require 1400 days. This is based on complexity of the Advanced Programmable Signal Processor and other factors. i. Qualification Time Limitation: An offeror may not be denied the opportunity to submit and have considered an offer for a contract if the offeror can demonstrate to the satisfaction of the contracting officer that the offeror (or its product) meets these standards for qualification or can meet them before the date specified for award of the contract. The award will not be delayed to provide the vendor with an opportunity to demonstrate its ability to meet the standards specified in this qualification requirement. j. Evaluation of Proposals Not Previously Qualified: The offeror must be fully qualified in order to be eligible for a contract award. Therefore, the offeror must fulfill all of the requirements stated, in writing, in the qualification requirement before the date specified for award of the contract. Once all requirements are met, the offeror will be listed as an approved repair source for this item. Approval, however, does not guarantee subsequent contract award. REPAIR QUALIFICATION REQUIREMENTS NSN: 1270-01-396-3088 P/N: 783R300G01 Noun: Advanced Programmable Signal Processor Application: AN/APG-68 Radar, F-16 C/D Aircraft 2 Jun 2020 Section C 3/3 2. SOURCE QUALIFICATION WAIVER REQUIREMENTS Sources who meet any of the following Source Qualification Waiver Criteria (QWC) may apply for a waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify production capability: a. QWC1: The potential source submits written certification that the articles have been supplied to the government or original equipment manufacturer (e.g., DD Form 250, Material Inspection and Receiving Report, Purchase Order invoice, etc). b. QWC2: A source qualified to provide an assembly is usually qualified to provide subassemblies, major components, and items of that assembly. c. QWC3: A source qualified to provide earlier dash numbers of a basic P/N may be qualified to provide other dash numbers of that same basic P/N, provided there is no increase in complexity, criticality, or other relevant requirements. d. QWC4: A source qualified to provide a similar or like item can be qualified to provide the required item. However, for approval, the engineering authority must verify that there is no increase in complexity, criticality, or other requirements over that of the similar item. At a minimum, the source shall provide a complete set of drawings for the similar item and written proof, such as purchase orders, shipping documents, etc., to show that the similar item was provided to the original equipment manufacturer or DoD. e. QWC5: A source previously qualified to provide an item, but which has been purchased, sold, merged, absorbed, reformed, split, etc., may qualify if it can be established that the qualification is currently with the requester and that the requester has the same or equivalent facilities, tooling, equipment, personnel, and utilizes the original forging, castings, etc., in the repair process.

Source: SAM.gov, General Services Administration (public domain). BidTerrier shows public notices as published and cannot confirm that a notice is complete or current. Details can change, so always check the official notice. Nothing here says whether your business is eligible.