PARTS KIT BALL VALV
Dept of Defense, Dept of the Navy
The official notice is always free. Read the full documents there before you bid.
Key facts
- Closes
- Nov 27, 2026, 5:00 PM ET (5 days left)
- Place of work
- Location not stated
- Notice type
- SolicitationA request for offers or bids. This is the notice you respond to.
- Solicitation number
- N0010426QNF00
- Office
- NAVSUP WEAPON SYSTEMS SUPPORT MECH
- Posted
- Oct 28, 2026
- Codes
- NAICS 332919 | PSC 4820
- Contact in the notice
- Telephone: 7176054866, heather.r.jones52.civ@us.navy.mil
- Source
- SAM.gov Contract Opportunities
What this is
A plain-English summary has not been written for this notice yet. The facts above come straight from the notice, and the original description is further down this page.
Similar open bids
Shipping and Storage
Dept of Defense · Location not stated
Closes todaySources soughtCloses Nov 22, 2026, 6:00 PM ET
The Defense Logistics Agency is conducting a sources sought notice to find companies that can manufacture shipping and storage items for a planned Hazard Material Storage Building requirement. This is market research, not a request for quotes, and it does not commit the Government to buy anything.
VALVE,LNDGR ISOLTN,, IN REPAIR/MODIFICATION OF
Dept of Defense · Location not stated
Closes todayPresolicitationCloses Nov 22, 2026, 11:00 PM ET
VALVE,LINEAR,DIRECT, IN REPAIR/MODIFICATION OF
Dept of Defense · Location not stated
Closes todayPresolicitationCloses Nov 22, 2026, 11:00 PM ET
VALVE,LINEAR,DIRECT
Dept of Defense · Location not stated
Closes todayPresolicitationSmall business set-asideCloses Nov 22, 2026, 11:00 PM ET
VALVE ASSEMBLY,MANI, IN REPAIR/MODIFICATION OF
Dept of Defense · Location not stated
Closes todayPresolicitationCloses Nov 22, 2026, 11:00 PM ET
Recent awards from Dept of Defense
Award notices this agency published, as listed by the source.
- Dept of Defense · awarded Nov 20, 2026 · US$350,000 · to KAREN CARLISLE
- Dept of Defense · awarded Nov 20, 2026 · US$350,000 · to ARIZONA AERO FASTENERS, INC
- Dept of Defense · awarded Nov 20, 2026 · US$502,500 · to TREADWELL CORPORATION (DELAWARE)
- Dept of Defense · awarded Nov 20, 2026 · US$350,000 · to INTERCONTINENTAL BEARING SUPPLY COMPANY, LLC
Original description from the notice
CONTACT INFORMATION|4|N744.24|WVN|771-229-0476|heather.r.jones52.civ@us.navy.mil| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| MARKINGS LEVEL I/SUBSAFE/DSS-SOC/TRIPER|5|||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)|1|See Specifications Section C and Section E.| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|6||||||| INSPECTION AND ACCEPTANCE - SHORT VERSION|8||||||||| INSPECTION/ACCEPTANCE POINT|6|TBD|TBD|TBD|TBD|TBD|TBD| GENERAL INFORMATION-FOB-DESTINATION|1|A| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Stand-Alone Receiving Report - Certifications; COMBO - Receiving Report & Invoice - Material.|N/A|TBD|N00104|TBD|TBD|SEE SCHEDULE|TBD|||TBD||||See Form DD1423|| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|WSS| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUNE 2003)|6|One year from date of delivery.|One year from date of delivery.||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| SMALL BUSINESS SUBCONTRACTING PLAN (DOD CONTRACTS)-BASIC (DEV 2026-O0037)(JUL 2026))|2||| WARRANTY OF DATA-BASIC (DEVIATION 2026-O0035) (FEB 2026)|2||| NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (DEV 2026-O0037)(FEB 2026)|1|| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PERPARDENESS, AND ENRGY PROGAM USE (APRIL 2008))|2||X| 1. This requirement is pursuant to Emergency Acquisition Flexibilities (EAF). 2. The resultant award of this solicitation will be issued bilaterally, requiring the contractor's written acceptance prior to execution. 3. All contractual documents (i.e. contracts, purchase orders, task orders, delivery orders, and modifications) related to the instant procurement are considered to be "issued" by the Government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commerce methods such as email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein. 4. If requirement will be packaged at a location different from the offeror's address, the offeror shall provide the name, street address, and CAGE of the facility. 5. Any contract awarded as a result of this solicitation will be ;DO/DX; certified for national defense under the Defense Priorities and Allocations System (DPAS). Provision 52.211-14, Notice of Priority Rating for National Defense, Emergency Preparedness, and Energy Program Use, shall be inserted in solicitations when the contract to be awarded shall be a rated order. 6. If drawings are included in the solicitation, access needs to be requested on the individual solicitation page under Contract Opportunities on SAM.gov website. After requesting access, send an email to the POC listed on the solicitation. 7. NAVSUP WSS Mechanicsburg will be considering past performance in the evaluation of offers IAW FAR 13.106(a)(2). 8. Data Item A001 (Inspection and Test Plan) may be waived if already on file at NAVSUP WSS Mechanicsburg. 9. This order requires a Higher Level Inspection. \ 1. SCOPE 1.1 The material covered in this contract/purchase order will be used in a crucial shipboard system. The use of incorrect or defective material would create a high probability of failure resulting in serious personnel injury, loss of life, loss of vital shipboard systems, or loss of the ship itself. Therefore, the material has been designated as SPECIAL EMPHASIS material (Level I, Scope of Certification, or Quality Assured) and special control procedures are invoked to ensure receipt of correct material. 2. APPLICABLE DOCUMENTS 2.1 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order must take precedence. Nothing in this contract/purchase order, however, must supersede applicable laws and regulations unless a specific exemption has been obtained. 2.2 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions. 2.2.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order. 2.2.2 Documents, drawings, and publications supplied are listed under "Drawing Number". These items should be retained until an award is made. 2.2.3 Specification Revisions - The specification revisions listed under "Documents References" below are the preferred revision. Older and/or newer r evisions are acceptable when listed within Contract Support Library Reference Number CSD155 in ECDS (Electric Contractor Data Submission) at: ht tps://register.nslc.navy.mil/. This is to allow Contractors to use certain acceptable older specification revisions to purge their existing stock of material certified to those older revisions or to use newer specification revisions when material is certified to newly released revisions,without requiring the submittal of waiver/deviation requests for each specification revision on every contract. Revisions of specifications reflecting editorial and/or re-approval (e.g. E2009, R2014, etc.) are considered inconsequential, but are acceptable when their revisions are listedwithin CSD155 or elsewhere within this contract. DRAWING DATA=4384678 |80064| C| |D|0001 | C|49998|1136401 DRAWING DATA=6408784 |53711| G| |D|0001 | G|49998|0485147 DRAWING DATA=6408784 |53711| G| |D|0001.A | F|49998|0287643 DRAWING DATA=6408784 |53711| G| |D|0001.B | G|49998|0472234 DRAWING DATA=6408784 |53711| G| |D|0001.C | G|49998|0558855 DRAWING DATA=6408784 |53711| G| |D|0001.D | G|49998|0550305 DRAWING DATA=6408784 |53711| G| |D|0001.E | G|49998|0571760 DRAWING DATA=6408784 |53711| G| |D|0001.F | G|49998|0394198 DRAWING DATA=6408784 |53711| G| |D|0001.G | F|49998|0365994 DRAWING DATA=6408784 |53711| G| |D|0001.H | F|49998|0416942 DRAWING DATA=6408784 |53711| G| |D|0001.J | G|49998|0479318 DRAWING DATA=6408784 |53711| G| |D|0001.K | C|49998|0225968 DRAWING DATA=6408784 |53711| G| |D|0001.L | E|49998|0295546 DRAWING DATA=6408784 |53711| G| |D|0001.M | C|49998|0238215 DRAWING DATA=6408784 |53711| G| |D|0001.N | D|49998|0225359 DRAWING DATA=6408784 |53711| G| |D|0001.P | E|49998|0245921 DRAWING DATA=6408784 |53711| G| |D|0001.R | E|49998|0141705 DRAWING DATA=6408784 |53711| G| |D|0002 | G|49998|0314749 DRAWING DATA=6408784 |53711| G| |D|0002.A | G|49998|0295580 DRAWING DATA=6408784 |53711| G| |D|0002.B | G|49998|0309802 DRAWING DATA=6408784 |53711| G| |D|0002.C | G|49998|0297839 DRAWING DATA=6408784 |53711| G| |D|0002.D | G|49998|0306373 DRAWING DATA=6408784 |53711| G| |D|0002.E | G|49998|0291975 DRAWING DATA=6408784 |53711| G| |D|0002.F | G|49998|0300432 DRAWING DATA=6408784 |53711| G| |D|0002.G | G|49998|0249846 DRAWING DATA=6408784 |53711| G| |D|0002.H | G|49998|0315473 DRAWING DATA=6408784 |53711| G| |D|0002.J | G|49998|0290477 DRAWING DATA=6408784 |53711| G| |D|0002.K | G|49998|0306289 DRAWING DATA=6408784 |53711| G| |D|0002.L | G|49998|0304890 DRAWING DATA=6408784 |53711| G| |D|0002.M | G|49998|0335217 DRAWING DATA=6408784 |53711| G| |D|0002.N | G|49998|0272254 DRAWING DATA=6408784 |53711| G| |D|0003 | F|49998|0220529 DRAWING DATA=6408784 |53711| G| |D|0003.A | F|49998|0157992 DRAWING DATA=6408784 |53711| G| |D|0003.B | G|49998|0240006 DRAWING DATA=6408784 |53711| G| |D|0003.C | F|49998|0147720 DRAWING DATA=6408784 |53711| G| |D|0003.D | F|49998|0149083 DRAWING DATA=6408784 |53711| G| |D|0003.E | F|49998|0188053 DRAWING DATA=6408784 |53711| G| |D|0003.F | F|49998|0250438 DRAWING DATA=6408784 |53711| G| |D|0003.G | F|49998|0208998 DRAWING DATA=6408784 |53711| G| |D|0003.H | G|49998|0284381 DRAWING DATA=6408784 |53711| G| |D|0003.J | G|49998|0314647 DRAWING DATA=6408784 |53711| G| |D|0003.K | F|49998|0258080 DRAWING DATA=6408784 |53711| G| |D|0003.L | F|49998|0245590 DRAWING DATA=6408784 |53711| G| |D|0003.M | F|49998|0143929 DRAWING DATA=6408784 |53711| G| |D|0003.N | F|49998|0140630 DRAWING DATA=6408784 |53711| G| |D|0003.P | F|49998|0149944 DRAWING DATA=6408784 |53711| G| |D|0003.R | F|49998|0192941 DRAWING DATA=6408784 |53711| G| |D|0003.T | G|49998|0257600 DRAWING DATA=6408784 |53711| G| |D|0003.U | F|49998|0143214 DRAWING DATA=6408784 |53711| G| |D|0003.V | F|49998|0150759 DRAWING DATA=6408784 |53711| G| |D|0003.W | F|49998|0199783 DRAWING DATA=6408784 |53711| G| |D|0003.Y | F|49998|0150738 DRAWING DATA=6408784 |53711| G| |D|0004 | F|49998|0152567 DRAWING DATA=6408784 |53711| G| |D|0004.A | F|49998|0153261 DRAWING DATA=6408784 |53711| G| |D|0004.B | F|49998|0153232 DRAWING DATA=6408784 |53711| G| |D|0004.C | G|49998|0286081 DRAWING DATA=6408784 |53711| G| |D|0004.D | G|49998|0297409 DRAWING DATA=6408784 |53711| G| |D|0004.E | F|49998|0194149 DRAWING DATA=6408784 |53711| G| |D|0004.F | F|49998|0199753 DRAWING DATA=6408784 |53711| G| |D|0005 | F|49998|0191745 DRAWING DATA=6408784 |53711| G| |D|0006 | F|49998|0249711 DRAWING DATA=6408784 |53711| G| |D|0007 | F|49998|0216570 DRAWING DATA=6408784 |53711| G| |D|0008 | F|49998|0211254 DRAWING DATA=6408784 |53711| G| |D|0009 | F|49998|0218828 DRAWING DATA=6408784 |53711| G| |D|0010 | F|49998|0127037 DRAWING DATA=6408784 |53711| G| |D|0011 | G|49998|0278990 DRAWING DATA=6408784 |53711| G| |D|0012 | G|49998|0239278 DRAWING DATA=6408784 |53711| G| |D|0013 | G|49998|0310649 DRAWING DATA=6408784 |53711| G| |D|0014 | G|49998|0237699 DRAWING DATA=6408784 |53711| G| |D|0015 | F|49998|0108453 DRAWING DATA=6408784 |53711| G| |D|0016 | F|49998|0108785 DRAWING DATA=6408784 |53711| G| |D|0017 | F|49998|0111575 DRAWING DATA=6408784 |53711| G| |D|0018 | F|49998|0119999 DRAWING DATA=6408784 |53711| G| |D|0019 | F|49998|0148631 DRAWING DATA=6408784 |53711| G| |D|0020 | F|49998|0152166 DRAWING DATA=6408784 |53711| G| |D|0021 | F|49998|0130943 DRAWING DATA=6408784 |53711| G| |D|0022 | G|49998|0223526 DRAWING DATA=6408784 |53711| G| |D|0023 | F|49998|0115733 DRAWING DATA=6408784 |53711| G| |D|0024 | F|49998|0115543 DRAWING DATA=6408784 |53711| G| |D|0025 | F|49998|0100554 DRAWING DATA=6408784 |53711| G| |D|0026 | F|49998|0160953 DRAWING DATA=6408784 |53711| G| |D|0027 | F|49998|0198229 DRAWING DATA=6408784 |53711| G| |D|0028 | F|49998|0151387 DRAWING DATA=6408784 |53711| G| |D|0029 | F|49998|0233249 DRAWING DATA=6408784 |53711| G| |D|0030 | F|49998|0126688 DRAWING DATA=6408784 |53711| G| |D|0031 | G|49998|0165644 DOCUMENT REF DATA=ANSI/ASQ Z1.4 | | | |080101|A| | | DOCUMENT REF DATA=ASTM-B367 | | | |220401|A| | | DOCUMENT REF DATA=MIL-STD-792 | | |F |060519|A| | | DOCUMENT REF DATA=SAE AMS 6931 | | |D |171201|A| | | DOCUMENT REF DATA=ISO_9001 | | | |081115|A| | | DOCUMENT REF DATA=ISO10012 | | | |030415|A| | | DOCUMENT REF DATA=ISO/IEC 17025 | | | |050515|A| | | DOCUMENT REF DATA=MIL-I-45208 | | |A |810727|A| 1| | DOCUMENT REF DATA=MIL-STD-45662 | | |A |880801|A| | | DOCUMENT REF DATA=ANSI/NCSL Z540.3 | | | |130326|A| | | DOCUMENT REF DATA=0900-LP-001-7000 | | | |810101|C| |01| DOCUMENT REF DATA=S9074-AQ-GIB-010/248 | | |1 |191112|A| | | DOCUMENT REF DATA=S9074-AR-GIB-010A/278 (CHG A) | | | |130214|A| | | 3. REQUIREMENTS 3.1 ;Parts kit for a size 2 1/2" Ball valves, consisting of one Ball, Find No. 167 and two mating seats, Find No. 168 to be in accordance with Naval Sea System Command Drawing 801-6408784, except as amplified or modified herein.; 3.2 Material for Parts Requiring Certification - Quantitative chemical and mechanical analysis is required for the parts listed below unless specifically stated otherwise: Part - ;Ball - Find No. 167; Material - SAE-AMS-6931 OR Centrifugally cast 6AL-4V, ASTM-B367, Grade C-5, with mechanical properties as listed in supplementary Requirement S6. Note: Mechanical properties for bars, forgings and forging stock over 10" must be as specified in the applicable drawing. If the mechanical properties are not provided in the drawing, the mechanical properties specified in SAE-AMS-6931 Table 2 for material 6" to 10", must be applied. Part - ;Seats - Find No. 168; Material - Delrin: Dupont AF DE588 (Teflon Filled Acetal) (Properties Specified Below Only) ITEM PROPERTY ASTM TEST METHOD VALUE (A) Specific Gravity D792 (Note 1) 1.50 - 1.57 (B) Melting Point D2133 or D3418 172 - 184 deg C (342 - 363 deg F) (C) Tensile Strength (MIN) D638 (Notes 1 & 5) 6100 PSI (D) Tensile Impact (MIN) D1822 Type S (Notes 1 & 5) 5 FT-LB/SQ IN (E) Compressive Stress D695 2100 @ 1% DEF. (MIN - PSI) (Notes 1 & 5) 11,000 @ 10% DEF. (F) Water Absorption D570 .30% MAX 24 Hours (G) Rockwell Hardness (R) D785 (Note 1) 115 +/- 15 (H) Teflon Fiber Content (Note 2) 18 - 23% (I) Dimensional Change (Note 4) .7% MAX NOTES: 1. Material conditioning prior to test is at the vendor's option. 2. Teflon Fiber Content - As certified by DuPont (raw material). 3. Visual and Dimensional Inspection of Product (Final Machined Condition) - White Teflon string inclusions must not exceed the following: A. Diameter 1/32" B. Length 1/8" C. Density 6 indications per 100 SQ IN 4. The test method to determine dimensional stability must be performed as follows: The test specimens (finished pieces) tested must be measured at 23 +/- 3 deg C (73 +/- 5F) and placed in a mineral oil bath maintained at 160 +/- 3 deg C (320 +/- 5F) the specimens must remain in the bath for six (6) hours at temperature and allowed to slow cool in the bath at a rate not to exceed 23 +/- 3 deg C (73 +/- 5F) per hour. When the bath reaches 23 +/- 3 deg C (73 +/- 5F), the test specimens must be removed and measured. The percent change in each dimension, outside diameter, inside diameter and thickness must not be greater than the value specified. ^Mineral oil meets the specification as listed below: Description.......................Passes U.S.P. Test (USP XX, P.1143) Solubility........................Passes U.S.P. Test (USP XX, P.1143) Neutrality........................Passes U.S.P. Test (USP XX, P.532) Readily Carbonizable Substances...Passes U.S.P. Test (USP XX, P.532) Limit of Polynuclear Compounds....Passes U.S.P. Test (USP XX, P.532) Solid Paraffin....................Passes U.S.P. Test (USP XX, P.532) Specific Gravity @ 25 deg C (77 deg F).0.8600 to 0.8900 Viscosity @ 37.8 deg C (100F).....73.6 to 84.4 Centistokes (340-390 SUS) Flash Point Cleveland Open Cup....420 deg F (216C) (Typical) Refractive Index @ 20C (68F)......1.480 (Typical) 5. Values are minimum mean values. Individual specimen values may not vary more than 25% below the specified minimum mean value. Should one specimen exceed the 25% criteria, retest is required. Failure to meet the above criteria a second time is cause for rejection. 3.3 Testing Certification - Certifications are required for the following tests on the items listed below. Additional testing on other piece parts (if any) per applicable drawings and specifications is still required, but certifications are only required as listed below. Test - ;Ultrasonic Inspection on Starting Material; Item - ;Ball - Find No. 167 (If Starting Material per SAE-AMS-6931); Performance - ;SAE-AMS-6931 and SAE-AMS-2631; Acceptance - ;SAE-AMS-2631; Test - Non-Destructive Tests Item - ;Weld Repair and/or Production Weld (as applicable); Performance - Per applicable fabrication specification Acceptance - Per applicable fabrication specification 3.4 Seat Stack Height Measurement - To ensure that each seat is within tolerance, check each seat singularly by measuring the seat height over the ball. This measurement is calculated by adding one-half ball diameter to the half stack height dimension on the drawing. Limits are determined by the ball diameter tolerance and the half stack height tolerance. Check dimensions by measuring from the seat back face to top of ball. Manufacturers of seats that do not have a ball of the required size available will be required to manufacture a dummy ball or segment of a ball with sufficient spherical surface to check the above dimension. 3.5 Chemours Company (formerly DuPont) Teflon Coating 850G-204 and 852G-201. Use of Chemours Company (formerly DuPont) Teflon Coating 851N-204 and 852N-201 is acceptable until exhausted - Teflon coating of ball(s) must be in accordance with general note ;4.F.; of drawing ;803-4384678; . 3.5.1 Naval Ordnance Systems Command OD 10362 First Revision dated 15 Aug 1961 is provided by Contract Support Library Reference Number CSD018 in ECDS at https://register.nslc.navy.mil/ 3.6 Ball Spherical Surface Waviness - Unless otherwise specified on drawing, all sealing area surfaces must have a spherical surface waviness which does not exceed 0.0005 inches of height per inch of spherical surface. Roughness and waviness ratings must apply in a direction which yields the maximum rating, normally perpendicular to the lay. 3.7 ;Surface waviness must be verified prior to Teflon coating.; 3.8 A visual inspection shall be performed on the finished seat with acceptance criteria on critical surfaces per CSD167 in the ECDS (Electronic Contractor Data Submission) system at: https://register.nslc.navy.mil/. 3.9 Welding or Brazing - When welding, brazing, and allied processes are required, as invoked by Section C paragraph 3 requirements, they must be in accordance with S9074-AR-GIB-010A/278, 0900-LP-001-7000 for brazing of piping and pressure vessel applications, or S9074-AQ-GIB-010/248 for brazing of other applications. For all production and repair welding and brazing personnel and procedures must be qualified under S9074-AQ-GIB-010/248 or 0900-LP-001-7000, as applicable. Procedures and Qualification Data must be submitted for review and approval prior to performing any welding or brazing. 3.10 Configuration Control - The Contractor must maintain the total equipment baseline configuration. For items of proprietary design, Contractor drawings showing the latest assembly configuration must be provided to the Government in electronic (C4) format. Definitions are provided elsewhere in the Contract/Purchase Order. 3.10.1 Waivers/Deviations - All waivers and deviations, regardless of significance or classification require review and approval by the Contracting Officer. Waivers and Deviations must be designated as Critical, Major, or Minor. The Contractor must provide a copy of this request to the QAR. Requests must include the information listed below. a. A complete description of the contract requirement affected and the nature of the waiver/deviation (non-conformance), including a classification of Critical, Major, or Minor. b. Number of units (and serial/lot numbers) to be delivered in this configuration. c. Any impacts to logistics support elements (such as software, manuals, spares, tools, and similar) being utilized by Government personnel or impacts to the operational use of the product. d. Information about remedial action being taken to prevent reoccurrence of the non-conformance. 3.10.2 All requests for Waivers/Deviations on NAVSUP-WSS Contracts must be submitted to the NAVSUP WSS Contracting Specialist via eMail. 3.10.3 ECPs - The Government will maintain configuration control and change authority for all modifications or changes affecting form, fit, function, or interface parameters of the Equipment and its sub-assemblies. The Contractor must submit an Engineering Change Proposal (ECP) for any Class I or II changes that impact the Equipment covered by this contract. ECPs must be prepared in Contractor format, and must include the following information: a. The change priority, change class
Source: SAM.gov, General Services Administration (public domain). BidTerrier shows public notices as published and cannot confirm that a notice is complete or current. Details can change, so always check the official notice. Nothing here says whether your business is eligible.