RFI Process control system plumbing and programming
Dept of Defense, Dept of the Army
The official notice is always free. Read the full documents there before you bid.
Key facts
- Closes
- Nov 26, 2026, 5:00 PM ET (4 days left)
- Place of work
- Natick, Massachusetts
- Notice type
- Sources soughtThe agency is checking which businesses could do the work. It is not a request for a bid.
- Solicitation number
- RFIProcessControlSystemPlumbingAndProgramming
- Office
- W6QK ACC-APG NATICK
- Posted
- Nov 18, 2026
- Codes
- NAICS 334513 | PSC J044
- Contact in the notice
- Wesley Shaw, wesley.s.shaw.civ@army.mil
- Source
- SAM.gov Contract Opportunities
What this is
The U.S. Army DEVCOM Soldier Center is seeking information from potential sources for expert engineering support. The work would troubleshoot and improve a process control system for steam, water, and air used with hydraulic molding presses, including plumbing, valves, and Allen-Bradley PLC programming. This is a sources sought notice, not a solicitation, and no contract will be awarded from it.
AI summary of the public notice. Check the official notice before you bid.
Full summary
The full summary of this notice is for signed-in users
- Who can bid
- Key dates
- What the work includes
- How to respond
- Requirements to watch for
A free account lets you read 3 full summaries a day and save one search with a daily email. The official notice stays free for everyone.
Similar open bids
GENERATOR,PULSE, IN REPAIR/MODIFICATION OF
Dept of Defense · Massachusetts
Closes tomorrowSolicitationCloses Nov 23, 2026, 3:30 PM ET
The U.S. Department of the Navy is seeking a firm-fixed-price proposal to repair and modify pulse generators. The work includes testing and inspection to return the units to a Ready for Issue condition.
Cohasset School District: E-Rate bid request for Internet Access and Data Transmission Service, Uninterruptable Power Supply/Battery Backup and Necessary Software and Licenses and 6 more
Cohasset School District · Cohasset, Massachusetts
Closes tomorrowSolicitationCloses Nov 23, 2026
Cohasset School District is asking for bids on internet access and data transmission services. They also need uninterruptable power supply, battery backup, software, licenses, cabling, switches, and firewall services. This is a solicitation for E-Rate funding.
B-52 APQ-166 Magnetron/Electron Tube
Dept of Defense · Beverly, Massachusetts
8 days leftPresolicitationCloses Nov 30, 2026, 3:30 PM ET
SUPPLY AND REPAIR OF THE EXPEDITIONARY FLUID ANALYSIS SYSTEM (EFAS) MODULES, NSN: 6650-01-678-4220RN
Dept of Defense · Lawrence, Massachusetts
8 days leftSolicitation8(a) program (sole source)Closes Nov 30, 2026, 4:00 PM ET
Dept of Defense posted a solicitation titled "SUPPLY AND REPAIR OF THE EXPEDITIONARY FLUID ANALYSIS SYSTEM (EFAS) MODULES, NSN: 6650-01-678-4220RN". Place: Lawrence, Massachusetts. Responses are due Nov 30, 2026, 4:00 PM ET. The listing has little detail. Read the official notice for the full scope.
SPRRA227RSP07 PATRIOT System Integration and Checkout (SICO) Spares for Ground Support Equipment (GSE) - Sole Source to Raytheon Company
Dept of Defense · Andover, Massachusetts
13 days leftPresolicitationCloses Dec 5, 2026, 5:00 PM ET
Recent awards from Dept of Defense
Award notices this agency published, as listed by the source.
- Dept of Defense · awarded Nov 20, 2026 · US$9,000,000 · to MAGADIA CONSULTING INC Silver Spring MD 20903 USA
- Dept of Defense · awarded Nov 20, 2026 · US$208,800 · to SKO ENTERPRISES INC Coalville UT 84017 USA
- Dept of Defense · awarded Nov 20, 2026 · US$500,000 · to Valkryn Systems Inc New York NY 10012 USA
- Dept of Defense · awarded Nov 20, 2026 · US$50,408 · to INDATEL SERVICES LLC
Original description from the notice
SYNOPSIS: This Sources Sought Announcement is to assist the US Army DEVCOM Soldier Center to identify potential sources to provide expert engineering support to trouble shoot process control system providing steam water and air. Must have expertise in process control plumbing and control valves for steam systems. Must have expertise in Allen Bradley PLC programming. The Government requests that responses be submitted electronically to mary.k.prebensen.civ@army.mil and Wesley.s.shaw.civ@army.mil by November 26th, 2026 by 5pm EST. Background: The Government (DEVCOM Soldier Center) is in need of expert engineering support to diagnose current PLC and piping system which support multiple hydraulic press systems. The existing system controls water, steam and air to molding tooling, and the PLC operates on custom Allen-Bradley control software. As it stands, the system is physically installed, however does not provide necessary temperature control in either manual or automatic modes. Issues may be traced to the original system design, pipe rack installation, PLC programming or some combination of the three. Description: Expert engineering services are sought to diagnose newly installed PLC control system to ensure that it can meet system design requirements, can be operated safely and reliably, and is adaptable for future operation and changing requirements. A new PLC system has been designed and installed per a list of system requirements, however is not able to control temperature per design requirements either due to control logic, poor valve selection or related piping design/installation. SC requires a 3rd party engineering service to validate as-built drawings against the installed system, verify/update PLC programming, provide necessary hardware changes to bring the system up to full operability. Specific System Specifications: Electric steam boiler provides 125psi dry steam as primary heat source for molding tooling. Standalone chiller provides chilled water at ~60 psi, and house air provides air for purge and mist functions. The Allen-Bradley PLC system controls the various media through a series of modulating valves to heat or cool the tooling. The PLC is intended to have recipe writing and management for automated control. Basic recipe for our process includes steam heat via pressure control to desired temperature setpoint, hold for ~1 hr while controlling temperature. The tooling is then cooled with chilled water at a controlled cooling rate. Our standard tooling includes an upper and lower platen, and the PLC has capability to control these independently. Additional system requirements will be included if there is a future RFP. Current known system issues: System will not maintain equivalent temperature for upper and lower platens during heat up or hold. System will not control cooling rate based on system feedback loop. System trend screen not displaying data correctly. System alarms remain untested. Mist function does not function without vibration of piping rack. Unique Vendor qualifications: Potential vendor must be US based and employ US citizens identified to work on the PLC system due to sensitivity of materials and products produced by the installation laboratory. Potential vendor must be licensed in process system design with specific expertise in steam controls. Potential vendor must be able to read modify and update Allen Bradly system code. Deliverables: Full system walkdown and comparison to As-built drawings. Analysis of system design, layout, valve selection, PLC operability as compared to provided list of system requirements. List of proposed design changes to meet system requirements and cost of implementation. Install required hardware and make required changes to system software. May subcontract for implementation of hardware changes. Provide updated As-built drawings for plumbing systems, electrical systems, PLC controls systems. System demonstration and verification to the As-built drawings provided Modified code in digital and hardcopy. Verified system manual. Full system demonstration and minimum 1 day training on system operation. Delivery Date: Government estimates work will be completed within 6 months of date of contract award. Government Furnished Property (Equipment/Materials/Information/Computer Utilization): All work to be performed on site at SC with access to existing PLC and piping rack. Interested parties are invited to submit a response to this Sources Sought Announcement. THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY This Sources Sought Announcement is issued solely for information and planning purposes and to identify interested sources. THIS IS NOT A SOLICITATION. No contract will be awarded from this announcement. This Sources Sought does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. It is subject to change and is not binding on the Government. Further, unsolicited proposals will not be accepted. Funding is not available at this time. The United States Army has not made a commitment to procure any of the items/services discussed, and release of this Sources Sought Announcement should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. Response to this Sources Sought Announcement is voluntary and no reimbursement will be made for any costs associated with providing information in response to this and any follow-on information requests. All submissions become Government property and will not be returned. Not responding to this Sources Sought Announcement does not preclude participation in any future RFP if any is issued. If a solicitation is released, it will be synopsized in the SAM.gov website. It is the responsibility of the potential responders to monitor this site for additional information pertaining to this subject. RESPONSES: Interested parties may identify their interest and capability by sending responses regarding this requirement to DEVCOM Soldier Center via e-mail to mary.k.prebensen.civ@army.mil and Wesley.s.shaw@army.mil no later than November 26th, 2026 by 5:00 p.m. EST. The U.S. Government will not pay for any information or administrative cost incurred in response to this Notice. All costs associated with responding to this Notice will be solely at the expense of the interested party. Please provide business size (indicate your socioeconomic status), applicable NAICS code, and CAGE code. If you hold a GSA Federal Supply Schedule contract, please identify your contract number. QUESTIONS: Any questions for clarification may be emailed to mary.k.prebensen.civ@army.mil and Wesley.s.shaw@army.mil no later than November 20th, 2026 by 5:00 p.m. EST. Verbal questions will NOT be accepted. Questions shall NOT contain proprietary or classified information. An unattributed list of questions and answers will be published at the same web location of this Sources Sought Announcement. **Amendment 0001 posted to answer questions
Source: SAM.gov, General Services Administration (public domain). BidTerrier shows public notices as published and cannot confirm that a notice is complete or current. Details can change, so always check the official notice. Nothing here says whether your business is eligible.